PETOL™ X86 Connecting Link
PETOL™ X86 CONNECTING LINKS are forged from high-quality alloy steel, heat-treated, and 100% proof tested to ensure proper strength for spinning chain and cathead chain applications.
PETOL™ X86 Connecting Link Assembly Instructions
1. Slip the PETOL X86 halves through the chain to be connected.
2. Couple the PETOL X86 halves
.
3. With the PETOL X86 positioned as shown, drive in the spacer.
4. Turn the PETOL X86 over and peen the projecting spacer prongs.
PETOL™ X86 Connecting Link
|
CATALOG NO. |
FOR USE WITH CHAIN SIZES |
WEIGHT |
WORKING LOAD LIMIT |
X86 |
1/4' - 3/8' |
6-1/2 ozs. |
6,600 lbs. |
WARNING!
DO NOT EXCEED 6,600 LBS. WORKING LOAD LIMIT
Serious injury or death could occur if used improperly!
The PETOL™ X86 Connecting Link is for spinning and cathead chain applications only and is NOT TO BE USED FOR OVERHEAD LIFTING.
Do not reuse the PETOL X86 Connecting Link after disassembly.
Always follow established industry safe practices & procedures for alloy chain and attachments, as recommended by OSHA, NSC, IADC, AND NACM.